Notes, Tips, Choosing the dialing mode – Sony SPP-930 User Manual
Page 10: If you aren't sure of your dialing system, Step 2: setting up the base unit (continued)
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
step 2: Setting up the base unit (continued)
Notes
• Uso only the supplied AC-T120 AC power uduptor.
Do not use any other AC power adaptor.
• Connect the AC power adaptor to a continuous power supply.
• Place the base unit close to the AC outlet so that you
can easily unplug the AC power adaptor.
Polarity of the plug
Tips
It your telephone outlet isn't modular, contact your
telephone service company for assistance.
Modular
If you have two phone lines on a single jack with the
first phone line connected to a center pair of wires,
and you need to connect the second phone line
(outer pair of wires), contact your telephone
company for rewiring.
Center pair
Choosing the dialing mode
For the telephone to work properly, select an appropriate dialing mode
(tone or pulse).
DIAL MODE switch
If you aren't sure of your dialing system
Make a trial call with the DIAL MODE switch set to TONE.
If the call connects, leave the switch as it is; otherwise, set to
PULSE.
10^*^ Getting Started