Q] av 1/(1) switch, 2] display window, 3] system standby switch – Sony RM-LJ301 User Manual
Page 5: Note, S set up button, M sub button, 031 easy scroll key, G] master vol +/- buttons, 5] sleep button, 6] muting button
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Q] AV 1/(1) switch
Press to turn on or off the components that the remote
is programmed to operate. For details on
programming procedure, see'Trogramming the
Remote" on page 15.
[
2
] Display window
The current status of the selected component or a list
of selectable items appears here.
[
3
] SYSTEM STANDBY switch
Press to turn off the receiver and other Sony audio /
video components at the same rime. If you want to
change the function of the SYSTEM STANDBY switch
so that it turns on or off the receiver only, see page 16.
Note
Before you turn on the receiver, make sure that you have
turned the MASTER VOLUME control on the receiver to the
leftmost position to avoid damaging your speakers.
[S SET UP button
Press to display the set up list. Press again to revert
back to the component information.
m SUB button
While operating a component, press to display a list of
operations that the corresponding buttons are not
found on the remote. Then move the easy scroll key to
select the operation, and then press the key to enter
the selection. Press again to revert back to the
component information.
See the table on pages 10 and 11 for information on the
operations that appear when you press the SUB
button.
031
Easy scroll key
While displaying a list, move up or down to select an
item from the list, and then press to enter the selection.
a
ЫI
3
Ы.
w
7»
(6
3
0
tb
O
V
A
g] MASTER VOL +/- buttons
Press to adjust the volume level of all speakers at the
same time.
[5] SLEEP button
Press repeatedly to activate the sleep function and
select the duration after which the receiver turns off
automatically.
[6] MUTING button
Press to mute the sound. The MUTING indicator on
the receiver lights up when the sound is muted.
E] SOUND FIELD button
Press to display the sound field list. Press again to
revert back to the component information.
[8] FUNCTION button
Press to display the function (component) list. Press
again to revert back to the component information.
See the tablé on page 9 for information on the buttons
you can use to control each component.
If you want to change the contents of a function list to
match your particular components, do the procedure
"Programming the Remote" on page 15.
Note
After you have selected the VCR or DVD player, turn on the
TV and set the TV's video input to match the component you
selected.