Playing a tape, Fast pb, Tape speed – Sony M-729V User Manual

Page 4: Ватт, Pause, Cue/review i, To increase the playback speed, At the end of the tape, Recording/playback with the connected equipment, Dubbing onto another tape recorder

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Playing a Tape

1

Insert a cassette with the side to start playing facing
the lid.

2

Select the tape speecf to the same speed as that used

for recorciing.

3

Press

4

Adjust the x'olume.

EAR-

FAST PB—-►

TAPE

SPEED-------►

VOL

ВАТТ-

.PAUSE

CUE/REVIEW

I

To

Press or slide

Stop playback/stop fast

forward tir rewinci*

I’ausc playback

Slide PAUSE in the direction of the
arrow. The BATT lamp goes off.

Fast forward

Slide ■♦^CUE/^^REVIEW toward
•^^CUE during stop.**

Rewind

Slide ◄^CUE/^^RFVIEW toward
►►REVIEW during stop.**

Search forwarci during
playback (CUE)

Keep

◄◄CUH/^^REVIEW

pushed

down

during playback and release it at the point
you want.**

Search backward during
playback (REVIEW)

Keep •♦^CUE/^^REVIEW pushed up

during playback and release it at the point
you want.**

* If you leave the unit after the tape has been wound or rewound, the

batteries v\'ill be consumed rapidly. Be sure to depress I — .

** The tape moves faster in the rewind/REVIEW mode than in the fast

forward/CUE mode.

To increase the playback speed

Slide the FAST PB switch in the direction of the arrow. The
playback speed will be increased.
To return to the original speed, slide the FAST PB switch to the
original position.

At the end of the tape

In the recording or playback mode, the tape stops at the end of

the tape and the locked buttons will be released automatically

(Automatic shut-off mechanism).
After fast forward or rewind, be sure to set ’4^CUE/
►►REVIEW back to the center.

Recording/Playback with the
Connected Equipment

Dubbing onto another tape recorder

Set this unit to the pl.iybuck mode und another tape recorder to
the recording mode.

EAR

MIC

Connecting

cord

RK-G64HG

(not supplied)

Recording from another tape recorder

Set this unit to the recording mode and another tape recorder to
the playback mode. In this case set VOR to OFh.

MIC

EAR,EARPHONE,d

Connecting cord RK-G64HG (not

supplied)

Recording with an External Microphone

Connect a microphone to MIC. When using a plug-in-power
system microphone, the power to the microphone is supplied

from this unit.

MIC

Electret

condenser

microphone

ECM-T110 (not supplied)

Note

when recording with an external microphone, the VOR system may not
work properly because of the difference in sensitic'ity.

Advertising