Analog recording, Recording from the line (analog) input jack – Sony MDS-101 User Manual
Page 27
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Recording From the Line (Analog) Input Jack
Analog recording
If you use a recordable MD that already contains recorded
material, the unit will automatically record new material at the
end of the existing material, eliminating the need for time-
consuming searches.
3
Press INPUT SELECTOR until “Analog in"
light up.
The previous display appears again after a few
seconds.
O
INPUT
SELECTOR
flna 1o9 in
Press REC«(«).
The unit enters recording pause.
4 REC Ready
► II OS
Play the sound source (CD player, cassette
deck, etc.) to be recorded.
While monitoring through the headphones,
adjust the recording level using the REC
LEVEL control (see page 28).
Set to the position show below when recording
from a Sony OAT deck, CD player or cassette
deck.
Stop the sound source to be recorded.
8
Press (► - or
II).
Recording pause is canceled and recording
starts.
f
Oil
(Continued on next page.)
27