Installing the appliance, Safety warnings, Setting up the refrigerator – Samsung RA19V User Manual

Page 3

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

DA68-01658P(EN)-(3).pdf

1/31/08

10:32:07 AM

INSTALLING THE APPLIANCE

Selecting the location for appliance.

Install the appliance

properly on the flat an
firm surface

&

V y

Stand table option
model can not be
adjustable for the height

4 ^

of appliance.

V y

Install appliance In the available space.

• Allow 1 foot (30cm)

from the ceiling, and
2 Inches (5 cm) from
the wall.

\^ut5c

Install appliance in the appropriate location.

• Place the appliance

away from direct
sunlight or heat.

Do not install appliance in a damp place.

• There Is a risk of i

electric shock or

* * -

malfunctions.

SAFETY WARNINGS

Specification of electric powe .

• The electric power specificatio

of the appliance is
attached Inside at the top
of the door or outside at
the back.

Do not use any extension cords or double

adaptors.
• Do not plug several

appliances Into the same
multiple power board.

This could cause over

heating and the risk of fire.

0

Earthing the appliance.

• If the socket is the

2-legged type, the

appliance must be earthed.

• Do not connect the earthing'------------

wire to the gas pipes or telephone lines.

Replacing the lamp.
1. Unplug the power cord from the socket.

2. Remove Tray partition and shelf.
3. Unscrew by plus-type driver then take

out lamp cover.(optlonal model only)

4. Turn the lamp counter clockwise.
5. Replace with new lamp same specification

as original one.

Warning !: Disconnect power supply before

replacing the lamp.

Contains fluorinated greenhouse gases covered by
the Kyoto Protocol.

Hermetically sealed system.
Do not vent gases into the atmosphere.
Refrigerant type: R-134a

Quantity: 0.13 Kg
Global Warming Potential (GWP) = 1300

SETTING UP THE REFRIGERATOR

Step 1

Clean up inside of the refrigerator with a

ciean cioth.

— Step 2 -

Insert the power plug into the socket while
keeping the door open for checking the
interior light, then turn the temperature

V control button to “MAX”.___________

J

Step 3 -

Close the door and let the refrigerator
operate for 2-3 hours.

Step 4-

Check the refrigerator temperature by

touching inside the freezer.

^ Step 5 -

The appropriate temperature should

be controlled by turing the temperature

control button to “4", or the desired

temperature can be adjustable. Now your

V^refrigerator is ready to work.________^

Advertising