To control this player again, Notes, Loading the disc memos of the second cd player – Sony CDP-CE525 User Manual

Page 19: Note, Labeling discs of the second cd player, Playing cds 3

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

To

You need to

Pause

Press

II

Stop plav

Press ■

Locate a disc while
the second player is
set to Continuous
Play mode

Turn KM t>Oll untjLthe
display shows the disc number
you want, then push

KM ox

Locate a track

Press (-AMS+) ► ► until the
display shows the track number
you want

To do other operations, use the controls on the second
plaver or the supplied remote.
The AMS buttons /► ► !) and search buttons

/ ► ► ) on the remote operate the second player as

indicated on the remote.

To control the second player directly using the supplied
remote

Set CD 1 / 2/3 on the remote to CD 3 which is the same
position as the COMMAND MODE selector on the rear panel
of the second player.

To control this player again

Press MEGA CONTROL. The MEGA CONTROL button goes
off and you can control this player.

Notes

• You cannot locate a particular point in a track of the second

player using the controls on this player.

• Some controls on this player work on the second player

differently from they do to this player.

Loading the Disc Memos of the second CD
player

If the second CD player has the Disc Memo function
(see page 24), you can load the Disc Memos of the
second CD player to this player's memory and display

them on this player.

1

Press INPUT.

2

Turn IKK AMS I>t>ll until "LOADING MEMO"

appears in the display.

Playing CDs

3

Push KKI AMS »11.

This player starts loading. (Loading takes about

one minute.)

Note

If each Disc Memo of the second CD plaver has more than 12
characters, the first 12 characters of each are loaded to this
player.

Labeling discs of the second CD player

You can label discs of the second CD player or change
the Disc Memos loaded from the second CD player.

1

Press MEGA CONTROL.

The MEGA CONTROL button lights up.

2

Press CONTINUE.

3

Turn IMO

OM to select the disc you want,

then push KK!

MX.

4

Press INPUT.

5

Turn KM MX until " DISC MEMO"

appears in the display, then push KM (pj^Q

6

Input the new Disc Memo following the procedure

in "Labeling Discs" on pages 24 to 26.

Note

The new Disc Memos are stored on this player's memory, so
you cannot display them on the second CD player.

^

\ II

1 1 1

PH

1 1

и I t"WS

1 1 1 1 1

1 1

n I Pt

9

:

l o p d i n g

mem

O

t

.

^ и и t и и I n M I I и M I и I M I M M и--

19

Advertising