Maintenance, Specifications, Cleaning the cabinet – Sony CDP-C9ESD User Manual

Page 19: Cleaning discs

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Maintenance

Cleaning the cabinet

Clean the cabinet, panel and controls with a soft cloth lightly
moistened with a mild detergent solution. Do not use any

type of abrasive pad, scouring powder or solvent such as

alcohol or benzine.

Cleaning discs

Before Inserting the discs into the disc magazine, clean the

discs with the cleaning cloth. Wipe the disc from the center
out and along the

Do not use solvents such as benzine, thinner, commercially

available cleaners or anti-static spray intended for analog
discs.

Discs should be cleaned once every 6 months.

Specifications

System

Disc

Laser

Emission duration
Laser output

Frequency response
Signal to noise ratio
Dynamic range
Harmonic distortion
Channel separation
Wow and flutter

Compact disc digital audio system
Compact disc
Semiconductor laser (X = 780 nm)

Continuous
Less than 44.6 |iW

* This output is the value measured through the aperture of 7

mm diameter at a distar>ce of 200 mm from the objective

lens surface on the Optical Pickup Block.

2 - 20,000 Hz ± 0.3 dB

More than 105 dB
More than 95 dB
Less than 0.004%
More than 98 dB (1 kHz)
Below measurable limit

Power requirements 120 V AC, 60 Hz
Power consumption 11 W
Dimensions

Weight

Approx. 430 X 115 X 370 mm (w/h/d)

(17

X

4Va

X

1 4V

b

inches)

including projecting parts and controls

Approx. 6.5 kg

(14

lb 6 oz.), net

Supplied accessories

Remote commander (1)
Disc magazine (1)

Audio signal connecting cord

(phono plug

X

2 phono plug x 2) (1 )

Sony SUM-3 (NS) batteries (2)

Output jacks

LINEOUT

ja^)

Output level 2 V (at 50 kilohms)

Load impedance over 10 kilohms

DIGITAL OUT
(OPTICAL) (optical

output connector)

Wave length 660 nm

Output level -18 dBm

HEADPHONES
(stereo phone jade)

Output level max. 15 mW

Load impedance 32 ohms

Remote commander RM-D905

Remote control system

Infrared control

Power requirements 3 V DC with two size AA (R6) batteries
Dimensions

Approx. 67 x 20 x 175 mm (w/h/d)

(2^4 X ' Vi6 X 7 inches)

Weight

Approx. 130g (5 oz.) incl. batteries

Design and specifications subject to change without notice.

19

Advertising