Using the md display, Checking the remaining time of a track, Press display during play – Sony DHC-MD333 User Manual
Page 26
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Additional tasks
Programming the MD tracks
(continued)
To
Do this
Cancel
Press MD ■ to stop the
Programme
Programme Play, then press
Play
PLAY MODE repeatedly until
"PGM" and "SHUFFLE"
disappear.
Add a track to
the programme
(in stop mode)
Do steps 3 and 4.
Erase the
Press MD ■, the Programme
programme
Play in stop mode.
Tip
The programme you made remains after
Programme Play finishes. To play the same
programme again, press MD C>-.
Using the MD
display
You can check the remaining time and total
playing time of an MD.
DISPLAY
Checking the remaining
time of a track
Press DISPLAY during play.
Each time you press the button, the display
changes as follows:
The playing time and the track number
of the current track.
The remaining time and the track
number of the current track.
i
The track title of the current track*.
* "No Name" appears if no track title is stored.
To label a disc, see page 37.
26