Connecting tv antenna/cable – Sony KV-13TR28 User Manual

Page 11

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

I

Chapter 1: Setting Up

Connecting TV Antenna/Cable

Although you can use either an indoor or outdoor antenna with the TV, an outdoor antenna wili provide you with better picture
quality. You can receive cable TV by connecting a cable supplied by your local cable company.

Connecting VHP, UHF or VHP UHF Combination Antenna , or CATV Cable

75^hm coaxial cable (round)

1

'■/ V*

7 mm (1/4 inch) 10 mm (3/8 inch) F-type connector

Check your antenna cable type and prepare the end

of the cable using the F-type connector.

Attach an F-type connector (not supplied).

a

b

c

d

3 mm (1/8 inch)

2

Plug the connector into the VHF/UHF terminal at the
rear of the TV.

(Rear of TV)

VHF/UHF

300-ohm twin-lead cable (fiat)

1

Check your antenna cable type and prepare the end of

the cable using the 300-ohm twin-lead cable.

Attach the supplied antenna connector.

a

'3.

3

2

Plug the connector into the VHF/UHF terminal at the
rear of the TV.

MtfTc

VHF/UHF

(Rear of TV)

r

* Most combination antennas are equipped with a signal

splitter.

Remove the splitter and attach №e appropriate connector.

_____________ (for KV-20TS50)

Do not connect the antenna cable to the IR EMITTER terminal.

If you do so, the TV antenna could break.

The IR EMITTER terminal is covered with a plastic cap to
prevent misconnection.

CAUTION

Chapter 1 : Setting Up

11

Advertising
This manual is related to the following products: