Operating the radio, Manual tuning, To listen to the weather band – Sony ICF-S79V User Manual

Page 7: North and south american model only), Band, Preset tuning, Presetting a station, Tuning in to a preset station, 1 press radio on, Zf c

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Operating the Radio

Manual Tuning

1

Press

RADIO ON

to turn on the

radio.

The band and frequency will appear in the
display for a few seconds. Then the current
time indication will return to the display.

2

Press

BAND

repeatedly to select the

desired band.

There are two bands for FM (FM1 and

FM2); you may listen to either band.

3

Tune in to a station by pressing

TUNE/

TIMER ADJUST

+ or -

4

Adjust the volume using

VOL.

• To turn off the radio, press OFF.
• To improve radio reception

TV/WEATHER/FM (See Fig

H): Tie the FM

wire antenna to the suction cup. Extend
and adjust the antenna. Secure the suction
cup on the wall where you get optimum
reception.

AM(MW)/LW: Rotate the unit horizontally for

optimum reception. A ferrite bar antenna
is built in to the unit.

To listen to the WEATHER band

(North and South American model only)

1

Press

RADIO ON

to tuiTA on the radio.

2

Press

WEATHER

to switch to the

WEATHER band.

"WEATHER" will appear in the display.
Weather band channels 1 to 5 are preset
under PRESET TUNING buttons 1 to 5.
Choose the broadcast with the best
reception.

To switch back to the previous band, press

BAND.

Preset Tuning

You can preset up to 5 stations for each band; 10
stations for FM (5 stations in FMl, 5 stations in
FM2) and 5 stations for MW and/or LW.

Presetting a Station

Example: To set AM 1260 kHz to memory preset
button

2

.

1

Press

RADIO ON

to turn on the radio.

2

Tune in to AM 1260 kHz (See "Manual

Tuning").

3

Hold down the desired

PRESET

TUNING/PRESET TIMER

button (in

this case,

2

)

until you hear two short

beeps.

I

Zf C

I L

ULL C

The frequency will appear for a few
seconds and then the display will return to
the current time.

To change the preset station, preset a new

station to the button of your choice. The
previous station will be overwritten by the
new’ one.

Tuning in to a Preset Station

1

Press

RADIO ON

2

Press

BAND

repeatedly to select the

desired hand.

3

Press a

PRESET TUNING/PRESET

TIMER

button of \ our choice.

4

Adjust the \ oIume using

VOL.

•After a few secoru.h. tlu‘ dih.pl.n will
return to the current tune but tlie preset
tuning number indicatit'u

w t i l

remain.

Advertising