Cobra Digital DC6415 - Manual (Page 8)

6.
Battery Installation
Power Up
I. Open the battery chamber cover.
II. Insert batteries in correct polarity(+ and -)as shown on the inside
of the battery chamber.
III. Close the battery chamber cover.
IV. Power turns ON after pressing the power button.
V. The camera is now ready to take pictures.
Turning the Power ON/OFF
1. Power turns ON after pressing the power button.
2. To turn camera OFF press and Power button until the camera beeps
and the LCD screen is blank.
3. To turn camera ON from the OFF mode, press Power button until
a beep is heard and the LCD screen turn on.
Sleep Mode
When the camera is ON while not being used for 60 seconds, it will
automatically perform sleep mode to save battery power.
To re-activate the camera from sleep mode :
1. Press the Power button once.
2. The camera is ready to take the next picture.