Sony SLV-690HF - Manual (Page 39)

^ Set the date, start and stop times, channel
number and tape speed:
<> ‘CURSOR
1 Press CURSOR ^ to flash each item in
turn.
TIMER SET / CHECK 10/16 WE
^OfTE i.11 START STOP CH
-'lO / 16 we '- -- - -- --SP
2 Press CURSOR \ to set each item.
To correct a setting, press CURSOR to
return to that setting and reset.
To record the same program every day or the same day every week,
press CURSOR ^ while the date is flashing. For details, see "Daily/
weekly recording" on this page.
To record from a source connected to the LINE IN jacks, press
CURSOR 4- to display "L" in the "CH" position.
Press CURSOR ^ to confirm the setting.
<C*l-cuRSOR cursor (►) appears at the top of the line. To enter another
setting, move the cursor to the next line and repeat step 2.
Press EXECUTE.
Press POWER to turn off the VCR.
The TIMER indicator on the VCR lights up and the VCR stands by
for recording. When using a cable box, leave it on.
CO
CJ
O
■c
(C
o
3 in
Daily/weekly recording
In step 2 above, press CURSOR 4 to select the recording pattern. Each time
you press CURSOR
4, the indication changes as shown below.
the current date -► SU-SA MO-SA -► MO-FR -► EVERY SA -►........
EVERY MO —» EVERY SU —» 1 month later —► (cycles backward) —► the
current date
Tips
• To set the channel, you can also use the CH+/- or number buttons.
• To set the tape speed, you can also use TAPE SPEED.
Basic Operations 39