Removing dii^ from inside the viewfinder, To reattach the eyecup, Caution – Sony CCD-TRV12 User Manual
Page 39
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
Removing dii^ from inside the viewfinder
;
-
(
1
)
Remove the screw with a screwdriver (not supplied). Then, while sliding the
RELEASE knob, turn the eyecup in the direction of the arrow and pull it out.
(
2
)
Clean the surface with a commercially available blower.
>
a
To reattach the eyecup
(1)
Align the groove on the eyecup with the • mark on the barrel.
(
2
)
Turn the eyecup in the direction of the arrow. Then, replace the screw.
Caution
Do not remove any other screws. You may remove only the screws to remove the
eyecup.
39
Advertising
This manual is related to the following products: