Recording cue markers (m-727v only) – Sony M-527V User Manual
Page 6
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Recording cue markers (M-727V only)
While recording, you can record a special signal on the
tape to mark a specific position.
At the desired position, press CUE MARKER to record a
signal. Hie REC/BATT lamp goes off and a signal will be
recorded on the tape. If you want to record a signal
longer than that, press CUE MARKER as long as you
want.
IXuing cue and review, you will hear the beep sound at
the signal position. During playback, you will hear the
signal with low frequency sound at fite signal position.
Notes
•We recommend recording cue markers when there is a break in
the sound.
.. • During cue and review, the beep sotmds differently.
• The b^p may sound differently depending on the marked
position on the tape because the whtding speed varies horn the
beginning to the end of the tape.