Setting up the vcr 1 and vcf 2 buttons, Setting up the commander – Sony RM-SC200 User Manual
Page 6
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
About This Manual
Notes
• When the audio/video components(VCR,
DVD player, and DBS tuner) are not
compatible with the S-Link system, switch
the input of the TV manually.
• Make sure to connect the audio
components to the receiver when the
components are not compatible with the S-
Link system.
• When the audio component (CD player,
MD player, or tape deck) has a
mechanical power switch, connect the
AC power cord of the audio component
to the switched AC outlet of the
receiver.
• Make sure that the power of the cable
box is always on.
• When the receiver is compatible with the
VisionTouch system, you do not have to
connect the S-Link/CTRL S in terminal of
the receiver to the TV.
Setting up the
Commander
Before use, you need to set up the function
buttons (VCR 1, VCR 2, and DBS/CATV).
Setting up the VCR 1 and VCF
2 buttons
Assign the categories of your components t<
the VCR 1 and VCR 2 buttons.
1
Make sure that the slide cover is closed.
2
While pressing down the VCR 1 or VCR
2 button, press the SYSTEM OFF button
repeatedly.
Each time you press the SYSTEM OFF
button, the indication changes as follow
VTR 3 (for^VHS VCR)
VTR 2 (for 8mm VCR)
i
VTR 1 (for 1? VCR)
i
DVD (for Digital Video Disc player
Release the VCR 1 or VCR 2 button wht
the category you want to assign appear: