Recording your own program fading in or out [i, A pause is counted as one track, Q' to change your program – Sony CDP-CA7ES User Manual
Page 12: O o o
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Recording Your Own Program Fading In or Out [I]
You can record the program you've created on a tape,
DAT or MD. The program can contain up to 32 tracks.
By inserting a pause during programming, you can
divide the program into two for recording on both
sides of a tape.
Number buttons
>10
II
Create your program (for side A when recording
on a tape) while checking the total playing time
indicated in the display.
Follow Steps 1 to 4 in "Creating Your Own
Program" on page 10.
The f'^1 indication appears in the display.
When you record on both sides of the tape, press
I I
to insert a pause'.
The "P" and indications appear in the display
and the playing time is reset to "0.00."
When you record on one side of the tape or on a
DAT or MD, skip this step and go to Step 4.
A pause is counted as one track
You can program up to 31 tracks when you insert a
pause.
You can manually fade in or out to prevent tracks from
starting or ending abruptly.
Note that you cannot use this effect when you use the
DIGITAL OUT (OPTICAL) connector.
□ (!□ !!□
O O O
o o o
o o o
OOP
o
□
□
czi □ □
B H
(^
B
o
ra-
FADER
To
Press FADER
Start play fading in
During pause. The
-<i|
indication
flashes and play fades in.
End play fading out
When you want to start fading out.
The
li‘-
indication flashes. The play
fades out and the player pauses.
Note
Fading lasts for about 5 seconds. However, when you press
FADER during Music Scan (see page 8), the play fades out for
about 2 seconds.
3
Repeat Steps 2 to 4 in "Creating Your Own
Program" on page 10 to create the program for
side B.
4
Start recording on the deck and then press ► on
the player.
When you record on both sides of the tape, the
player pauses at the end of the program for side A.
5
When you record on side B, reverse the tape and
press ► or
I I
on the player to resume playing.
'Q' You can check the total playing time while
programming (Program Edit)
To select a track, press 8« or >t>t and check the total
playing time. Then press PROGRAM to confirm your
selection.
'Q'
To change your program
See page 11.