Selecting the illumination mode of lcd back light – Sony ICD-55 User Manual
Page 36
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Selecting the Illumination Mode of LCD
Back Light
LIGHT OP'. The display window is illuminated for 3 seconds after each
operation.
LIGHT All; The display window is illuminated at all times during
operation.
1
Press MENU to enter the menu mode.
2
Press or ►>!+ to display "LIGHT"
and press ►■PLAY/STOP.
"OP (or AID" will flash.
3
Press
-V«
or ►►!+ to select "OP" or
"All" and press ►■PLAY/STOP.
Now the setting is completed.
4
Press MENU to exit the menu mode.
\
I I
I sm
Riflf' iri
\
)
When the unit is not being operated (when the display shows the current
time), you can illuminate the display window by pressing STOP. This
enables you to check the time even in a dark place.
Note
The effect of the illumination may be reduced in a bright location.
36