Tape deck, Tuner – Sony MHC-GRX66 User Manual
Page 46
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Troubleshooting (continued)
Tuner
Tape Deck
The tape does not record.
• No tape in the cassette holder.
• The tab has been removed from the
cassette (see "To save a tape
permanently" on page 43).
• The tápe has reeled to the end.
The tape does not record nor play or there
is a decrease in sound level.
• The heads are dirty. Clean them (see
"Cleaning the tape heads" on page 44).
• The record/playback heads are
magnetized. Demagnetize them (see
"Demagnetizing the tape heads" on page
44).
The tape does not erase completely.
• The record/playback heads are
magnetized. Demagnetize them (see
"Demagnetizing the tape heads" on page
44).
There is excessive wow or flutter, or the
sound drops out.
• The capstans or pinch rollers are dirty.
Clean them (see "Cleaning the tape
heads" on page 44).
Noise increases or the high frequencies are
erased.
• The record/playback heads are
magnetized. Demagnetize them (see
"Demagnetizing the tape heads" on page
44).
After pressing ► (-^) or there is a
mechanical noise, the unit enters standby
mode automatically and "EJECT" appears
in the display.
• The cassette tape was not inserted
correctly. Eject the tape and turn the
power back on.
Severe hum or noise ('TUNED" or
"STEREO" flashes in the display).
• Adjust the antenna.
• The signal strength is too weak. Connect
the external antenna.
A Stereo FM program cannot be received in
stereo.
• Press STEREO/MONO so that "STEREO"
appears.
If other troubles not described
above occur, reset the system as
follows:
1
Unplug the power cord.
2
Plug the power cord back in.
3
Press ■ , ENTER/NEXT, and DISC 1 at the
same time.
4
Press
I
/ (!) to turn on the power.
46