Sony CCD-TR416 User Manual

Page 65

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

mÊÊÊm

mmm

Symptom

Cause and/or Corrective Actions

Yhv

Ccissotto c.innot Iv ivniox oii trt>m

the holdoi'.

• The b.ittcrv i.s do.ul.

Use a charged batter\ pack or tire AC pow er adaptor.
(p. 7, 22)

[E and ^ indicators flash and no
tuncticin except for cassette ejectu>n
U'tM'ks,

• Moisture condensation has occurred.

Remo\ e the cassette and lea\ e the camau dor tor at least
1 lu>ur. (p. 57)

! he date

or

time indicator is flashing. • You pressed DA I H and PIMH together for more than

2 seconds.

The camcorder is not malfunctioning, ^'ou ma\ start

recording. Flashing will stop soon.

• The lithium batterv is weak iir dead.

Replace the lithium batterv with a new one. (p. ,^0)

The tape does not mm e when a

\'ideo control button is pressed.

• The I\')VVER switch is set to CAMPiRA or C.)i'b.

Set it to I^LA^'Id<.

• The tape has run out.

Rewind the tape or use a new

ono.

(p. 19)

The auti'>ti.x'using tunctitm tloes iiot

work.

• P'OeUS is set to MANGAT.

Set it to AUTC'). {p. nb)

• Shooting conditions are not suitable for autofocus.

Set F’OCIJS to MANUAL U> tocus manuallv. (p. 3b)

The tader function does not work.

• The S'l AKT/STOP MODF; switch is set to 5SLX' or ANTI

GROUND SHOOTING 1 .

Set it to A . (p. 15)

The date or time indicator

disappears.

• Reset the date and time. (p. 51)

r.xpi.>sv5re adjustment or tl"ie
PROGRAM AE function does not
work.

• The NIGHTSHOT switch is set to ON.

-> Set it to OFF.

Picture

Symptom

Cause and/or Corrective Actions

The image on the viewfinder screen

is ntit dear.

• The viewfinder lens is not adjusted.

Adjust the viewTinder lens. (p. 12)

A vertical band appears when a
subject such as lights or a candle
flame is shot against a dark
backgrtnind.

• The contrast between the subject and background is too

higli. The camcorder is not malfunctioning.

Change locations.

A vertical band appears when
shooting a verv bright subject.

• The camcorder is not malfunctioning.

64

Advertising
This manual is related to the following products: