To watch another tv program while recording, To save a recording, Tips – Sony SLV-775HF User Manual
Page 54: Notes, Recording tv programs (continued)
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Recording TV programs (continued)
To watch another TV program while recording
1
Press TV/VTR to turn off the VTR indicator in the display window.
2
If the TV is connected to the VCR's LINE OLT jacks, set the TV to TV
input; if not, skip this step.
3
Select another channel on the TV.
To save a recording
To prevent accidental erasure, break off the
safety tab as illustrated. To record on a tape
again, cover the tab hole with adhesive tape.
Tips
• To select a channel, you can use the number buttons on the remote commander.
Enter the channel number, then press ENTER.
• You can select a video source from the LINE-1 IN or LINE-2 IN jacks using INPUT
SELECT.
• The display appears on the TV screen indicating information about the tape, but the
information won't be recorded on the tape.
• If you don't want to watch TV while recording, you can turn off the TV. When using
a cable box, make sure to leave it on.
Notes
• The remaining time may not be indicated accurately for short tapes such as T-20 or
T-30, or tapes recorded in the LP mode.
• The display doesn't appear during still (pause) mode, search mode or slow-motion
playback.
• It may take up to one minute for the VCR to calculate and display the remaining
time after you press DISPLAY.
54
Basic Operations