Sony BDP-S301 - Manual (Page 18)

step 6: Easy Setup
Select “Start,” and press ENTER to start
“Easy Setup.”
Follow the steps below to make the minimum number of basic
adjustments for using the player. If you do not complete Easy
Setup, it will appear each time you turn on your player.
Make the settings below in the following order.
When turned on for the first time
Wait about 90 seconds before the player turns on and starts
Easy Setup. The start-up time will be much shorter once Easy
Setup is completed.
o
^ I/Ó
ENTER
Turn on the TV.
Press l/C!) to turn on the player.
The player turns on after a moment.
Switch the input selector on your TV so that
the signal from the player appears on your
TV screen.
If the display for OSD language selection does not
appear, select “Start” of “Easy Setup” in “Options”
Setup (page 52).
Select the OSD language you want to display,
and press ENTER.
E.'ivy
This will determine the Audio, Subtitle and BD/
DVD menu laneuaees as well.
se'üje ¿y.ití ihi.jlc
.\p> p'fVí;t;ii!, 'Si.t.;.'!.'. !■:, vbu ■ ;
♦If the above display does not appear
Go to step 6. This display appears only when the player is turned
on for the first time.
•J Select the video output format for the
connected TV, and press ENTER.
For details about the video output, see page 46.
♦ When using the HDMI OUT jack
L.Vs'J i-Sil!; '
.'i.iiJiiL victe^ ---■r.='a,; '
Select from “Auto,” “4801,” “480p,” “720p,”
“10801,” “lOSOp,” or “Source Direct,” then go to
step 8. “TV Type” in step 7 will be set to “16:9”
(wide screen).
♦ When using the jacks other than the HDMI OUT
jack
i.'flKV áí-u-p
OL-ljaii. -tirria';.
Select from “S-Video/Video only,” “4801,”
“480p," “720p,” “lOSOi” or “Don’t Know.” If
you select “720p” or “1080i,” go to step 8. “TV
Type” in step 7 will be set to “16:9” (wide
screen).
1 8