ClearSounds CS-CLA7BT - Manual (Page 16)

16 – ENGLISH 17 – ENGLISH
LEd INdICATOR
Low Battery: once the voltage is lower than
3.4V, the LED indicator will turn red.
LED Indicator status with No Charger Attached
LED Status Neckloop Action
oFF Power OFF
ON (Steadily) Pairing Mode
10 Rapid Flashes Pairing Successful
Flashes at 3 second intervals ( 0.1
seconds ON, 2.9 seconds OFF)
Standby (No Audio Connection)
Flashes at 8 second intervals (2.0
seconds ON, 6.0 seconds OFF)
Connected to Audio
LED Indicator status with Charger Attached
LED Status Neckloop Action
oFF Charging Complete
ON (Steadily) Charging
Note: When the neckloop is paired to the phone
and there is no operation for five (5) minutes,
the blue flashing LED turns off to save battery
and to make the wearer less conspicuous. To
confirm the CLA7BT is on, press and release the
Multi-Function button on the neckloop resets
the timer, and the flashing resumes.
AUdIO TONES
Audio Tone Neckloop Action
Series of 4 tone (low to high) Power ON
Series of 4 tones (high to low) Power OFF
CLA7BT-EN,SP,FR.indd 16 9/9/08 10:45:02 AM