Sony STR-GX49ES - Manual (Page 16)

Recording on an Audio Tape
Recording
POWER ON
db
(D
o (D dD ® ® dD
■ to TAPE
REC OUT
Record player ~1
5
I CD player | I Tape deck |
4
c VCR
]
1
Turn on the receiver and the equipment to be
used.
Seiect the desired program source.
For an FM/AM broadcast, tune in the desired
station.
Set the tape deck in the recording mode.
Start the desired program source.
To monitor recorded sound whiie recording
If a tape recorder with three-head system is connected to
TAPE MONITOR jacks, recorded sound can be monitored.
Select recording tape recorder using the TAPE MONITOR
button. The recorded sound is immediately fed back to the
amplifier and output to the speakers.
Note on recording
The setting of the volume, BASS, TREBLE, and BALANCE controls
do not have any effect on recording.
Tape Dubbing
3,6
1
Turn on the receiver and the equipment to be
used.
2
Insert the recorded tape into deck connected to
the TAPE jacks.
3
Insert a blank tape into the tape deck connected
to the TAPE MONITOR Jacks and adjust the
recording level.
Press TAPE.
5
Start the playback of the tape deck for
playback.
G Set the tape deck for recording in the recording
mode.
16