Adjusting the pincushion, Geometry, A 100 0 – Sony CPD-220VS User Manual
Page 21: To exit the osd, A 100
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
Adjusting the pincushion
The adjustment data becomes the individual setting for each input signal
received.
1. Press the O button.
The GEOMETRY OSD appears.
o
GEOMETRY
O
O
□
50
□
a 100
0
2.
Press the
3
+/-buttons.
+ to expand the picture sides
- to diminish the picture sides
3
t_7
To exit the OSD
Press the O button again.
Tip
If you don't touch any buttons, the OSD automatically disappears after 10 seconds.
When you want to adjust another item, press the button of the item. The OSD of the selected
item appears.
Adjustments
21
Advertising