Sony TA-AV571 - Manual (Page 12)

Using Sound Fields
Adjusting the speaker volume [X]
The test tone feature lets vou set the volume of your
speakers to the same level. (If all of your speakers have
-vqual performance, you don't have to adjust the
speaker volume.)
Using the controls on the remote lets you adjust the
volume level from your listening position.
1 Press SURROUND T.TONE.
You will hear the test tone from each speaker
sequentially.
2 Adjust thé volume level so that the test tone from
each speaker is at the same level from your
listening position.
• To adjust the level of center speaker, press
LEVEL CONTROL CENTER and then + or -,
• To adjust the level of rear speakers, press
LEVEL CONTROL REAR and then + or -.
3 Press SURROUND T.TONE to turn off the test
tone.
Adjusting the delay time X]
You can make the surround sound more effective by
delaying the output from the rear speakers (delay
time). You can adjust the delay time as follows.
c
20 ms— 30 ms— 15 ms
□
For example, if you've placed the rear speakers in a
large room or apart from your listening position, set
the delay time shorter.
1 Start playing a program source encoded with
Dolby Surround sound.
2 Press SURROUND DELAY repeatedly to adjust
the delay time.
You can also adjust the center or rear speakers using
the controls on the amplifier
1 Press DOLBY to turn on the Dolby Pro Logic mode.
The DOLBY PRO LOGIC indicator lights up.
2 Press CENTER or REAR. The CENTER or REAR
indicator lights up.
3 Press + or - to adjust the level.
Notes
• The center and rear levels are indicated on the level meter
in the display during adjustment.
• The center and rear levels are adjustable in the following
situations.
Center level: when the Dolby Pro Logic is on (when the
DOLBY PRO LOGIC indicator is lit)
Rear level: when the SURROUND M ODE (DOLBY,
HALL or SIM ULATED) is on
'O' You can adjust all speakers at one time
Adjust MASTER VOLUM E on the am plifier.
12