Sony CFD-S23 - Manual (Page 15)

Troubleshooting
g
<
о
о
л
c^j
00
о>
ь.
о
о
ем
00 ю
г-
о>
\
о
ео
\
Symptom Remedy I
The power is not on. • Cormect the AC power cord to a wall outlet j
securely. |
• Make sure the batteries are inserted correctfy.
• You carmothrm on the player with the remote |
e
S
Ф
when you operate the player on batteries.
There is no audio. • Make sure the funcrion you want to use appears
in the display window.
• Adjust the volume.
• Unplug the headphones when listening through
speakers.
"no disc" lights In the display even
when a Q) is in place.
• Insert the CD with the label surface up.
The CXJ does not play. • Make sure that the CD compartment is closed.
• Place the CD with the label surface up.
» • QeontheCD.
w
• Take out the CD and leave the CD compartment
n open for about an hour to dry moisture
0. condense tirm.
8 • Make sure "Cd" appears in the display.
The sound drops out • Reduce the vrjlume, 1
• Clean the CD, or replace it if the CD is badly
damaged
• Place the player In a locatiorr free from
vibration.
The audio is weak or has poor • Replace all the batteries with new ones if they
quality. are weak.
• Move the phyer away from the TV.
О
• If you are using the remote while listening to
AM or Ш radio, noise may be heard. This is
unavoidable
The picture of your TV becomes • If you are listening to an FM progratn near the
unstable. TV with an indoor antenna, move the player
away front the TV.
26 Additional Inforn^ation
Symptom Remedy
The tape does not move when you
press an operation button. • Oose the cassette compartment securely.
The REC # button does not * Make sure the safely tab on the cassette is in
ftmetion/The tape docs not play. place.
• Make sure "TAPE" appears in the display.
The tape does not erase completely. • Qean the erasing head (see page 28.)
• Replace all the batteries with new ones if they
1 ■
are weak.
The tape does rw>t record. • Make sure the tape is inserted properly.
SL • Make Sure the safety tab of the cassette is In
|2 place.
The audio is weak/The audio • Clean the heads, pinch roller and capstan (see
quaHtylspoor. . page 28).
• Demagnetize the heads using a demagnelizer
(see page 28).
The sourtd is distorted. • The TYPE n (high positiorO or TYPE IV (metal
tape is being used. Use TYPE I (normal) tape
only.
U
V
The timer does not operate. • Make strre the time on the dock is correct
E
i=
• Check to see if the AC power had been cut off.
• Make sure the 0 (dock) indication is displaye
The remote does not function. • Replace all the batteries In the remote with ne'
ones if they are week.
о • Make sure that you are pointing the remote at
я the remote seirsor on the player.
2¡ • Remove any obstades in the path of the remol
о and the player.
ì • Make sure the remote sensor is not exposed to
strong light such as direct sunlight or
i fluorescent lamp light.
• Move doser to the player when using the
remote.
The player uses a built-in micro computer for its various operations. Due to change In power
supply conditions, etc., operation may sometimes become unstable. After trying the alwve
remedies, if the player smi does not function properly, press RESET in the battery cocnpartmer
with a pointed material. If the problem persists, please consult your nearest Sony dealer.
Additional Informati
Ытттт