Sony SPP-900 - Manual (Page 11)

Paging
You can page from the base unit to the liandset.
Press ( HANDSET LOCATOR ).
The handset rings for one minute.
To end the page at the base unit,
press (
HANDSET LOCATOR ).
If a call comes in during paging, paging is cancelled.
Tip
To end a page at the handset, press (OFF).
Mounting the base unit on a wall
1 Raise the hang-up tab.
2 Plug the telephone line cord to the LINE jack and the AC power
adaptor to the EXZ IN 9V jack, and hook the cords. Use the shorter
cord for mounting.
3
Attach the wall bracket to the center of the base unit. Align the A
marks of the wall bracket with those of the base unit.
4" Plug the telephone line cord to the telephone outlet, and hook the
base unit to the wall plate.
5
Plug the AC power adaptor to an AC outlet. Then raise the antenna so
that it points towards the ceiling.
AC power
adaptor cord
Tip
To remove the wall bracket, press the lower tabs.
AC outlet
AC power
adaptor
Maintenance
• Clean the cabinets with a soft cloth slightly moistened with water or a mild
detergent solution. Do not use any type of abrasive pad, scouring powder or
solvent such as alcohol or benzine as they may damage the finish of the
cabinet.
• If the charge terminals of the base unit and handset are soiled,
wipe them with a soft cloth.
If you have any questions or problems concerning your phone, please consult
your nearest Sony dealer.