Chamberlain 3800PLD - Manual (Page 14)

14
If the optional EverCharge ® Standby Power System is part of this installation it should be
installed at this time. The SPS can be mounted to either the ceiling or a wall within 3 feet
(.9 m) of the garage door opener.
1. Position the SPS on a structural support (ceiling joist or wall stud).
2. Attach the SPS to the support with the 1-1/2 inch lag screws (2) provided. There are
mounting holes on either side of the SPS.
3. Connect the SPS cord into the connector on the bottom of the garage door opener.
4. Follow all instructions included with the EverCharge ® Standby Power System to test for
proper operation.
Install the EverCharge ® Standby Power System (SPS)
(optional)
8
Installation
SPU Cord
Connector
EverCharge ® Standby
Power System