Sony KP-53V75 - Manual (Page 46)

Additional Information
Troubleshooting
If the problem persists after trs’ing the methods below,
contact your nearest Sony dealer.
No picture (screen not lit), no sound
^ Make sure the power cord is connected
securely,
^ Operate with the buttons on the projection TV.
^ Insert the batteries in the remote control with
the correct polarity.
^ Replace the batteries with new ones if they are
weak.
Check to see if the TW VIDEO setting is correct:
when watching TV, set to TV, and when
watching video input pictures, set to VIDEO 1,
2, 3, or 4.
^ Try another channel. It could be station trouble.
^ Perform AUTO SET UP again using the SETUP
button to return to the factory preset condition,
(page 21)
Poor or no picture (screen lit), good sound
^ Adjust PICTURE in the VIDEO menu, (page 30)
^ Adjust BRIGHTNESS in the VIDEO menu.
(page 30)
Adjust convergence, (page 23)
^ Check antenna/cable connections, (page 6)
^ Perform AUTO SET UP again using the SETUP
button to return to the factory preset condition,
(page 21 )
Remove objects from the front of the projection
TV.
Good picture, no sound
^ Press MUTING so that "MUTING" disappears
from the screen, (page 26)
^ Check the MTS setting in the AUDIO menu,
(page 34)
^ Make sure SPEAKER is set to ON in the AUDIO
menu, (page 35)
^ Perform AUTO SET UP again using the SETUP
button to return to the factory preset condition,
(page 21)
No color
• Adjust the COLOR in the VIDEO menu, (page
31)
■ Confirm that black and white program is not
being broadcast.
• Perform AUTO SET UP again using the SETUP
button to return to the factory preset condition,
(page 21)
Only snow and noise appear on the screen
^ Check the CABLE setting in the SET UP menu
(page 24)
^ Check the antenna/cable connections, (page 6)
Make sure the channel is broadcasting
programs.
^ Press ANT to change the input mode, (page 27
Dotted lines or stripes
^ Adjust the antenna.
^ Move the projection TV away from noise
sources such as cars, neon signs, and hair­
dryers.
Double images or ghosts
^ Use a highly directional outdoor antenna or a
cable (when the problem is caused by
reflections from nearby mountains or tall
buildings).
Cannot operate menu
^ If the item you want to choose appears in gray,
you cannot select it. Press TV/VIDEO
correctly.
Check the CABLE setting in the SET UP menu,
(page
24)
Cannot receive upper channels (UHF) when using an
antenna
^ Make sure CABLE is OFF in the SET UP menu,
(page 24)
^ Use AUTO PROGRAM to add receivable
channels that are not presently in projection TV
memory, (pages
21, 25)
Cannot receive any channels when using
cable TV
^ Make sure CABLE is ON in the SET UP menu,
(page 24)
^ Use AUTO PROGRAM to add receivable
channels that are not presently in projection TV
memory, (pages
21, 25)
Remote control does not operate
^ Batteries could be weak. Replace the batteries,
(page 20 )
^ Make sure the projection TV's power cord is
connected securely to the wall outlet.
^ Press TV (FUNCTION) when operating your
projection TV.
^ Are fluorescent lights too close to the projection
TV? Move them at least 3-4 feet away from the
projection TV.
Cannot gain enough volume when using a cable box
^ Increase the volume at the cable box. Then pres'
TV (FUNCTION) and adjust the projection TV's
volume.
Projection TV malfunctions when using the S-Link
function
^ Make sure the projection TV's power cord is
connected securely to the wall outlet.
^ Check the S-Link connection, (pages 17, 18)
The projection TV needs to be cleaned
^ Clean the projection TV with a soft dry cloth.
Never use strong solvents such as thinner or
benzine, which might damage the finish of the
cabinet.
46-EN Additional Information