Sony SAT-A4 - Manual (Page 62)

Changing the Default
Data Service
The titles of the data services may be
different, based on the service being
provided.
Select one of the following:
To Do This ... Do This ...
Change the data service for the
current station only Select the data service and then
select RETURN.
Change the data service for all
stations Select DEFAULT (then see
"Changing the Default Data
Service" below).
Change the baud rate for the
Digital Satellite Receiver's wide
band data port Select BAUD (then see "Setting
the Baud Rate" below).
Use the DEFAULT button to select a default data service for all stations
that provide data services.
To change the data service for ail stations:
1 Select DEFAULT from the Data Services screen.
2 Select a default data service.
Setting the Baud Rate
The baud rates displayed may be different,
depending on which data port is being
used.
To set the baud rate for the Digital Satellite Receiver's data port:
1 Select BAUD from the Data Services screen.
2 Select a baud rate for the data port.
LOW SPEED DATA
62