Sony MHC-RXD2 - Manual (Page 19)

Selecting tape length
automatically
—Tape Select Edit
You can check the most suitable tape length
for recording a CD. Note that you cannot use
Tape Select Edit for discs containing over 20
tracks.
DISC SKIP/
EX-CHANGE Z
Note
You cannot use this function after programming.
In order to use this function, you must first erase the
program (see "Clear the entire program" in the table
on page 17).
Tip
To continue and record on the tape, follow the
procedure below.
1 Press ^ and insert a blank tape into deck B.
2 Press CD SYNC.
Deck B stands by for recording and the CD player
stands by for playback.
The indicator on TAPE B lights up.
3 Press PAUSE.
Recording starts on side A.
After recording for the set tape length time has
finished, the CD player pauses and "SYNC"
flashes.
4 Press ^ and turn over the tape.
5 Press PAUSE.
Recording starts on side B.
After recording for the set tape length time has
finished, the CD player and die tape deck stop
automatically.
1 Place a CD on the disc tray.
If ttie disc number you want to record is
not displayed, press DISC SKIP/
EX-CHANGE repeatedly so that it
appears.
2
Press FUNCTION repeatedly until
"CD" appears in the display.
3
Press EDIT once so that "EDIT"
flashes.
The required tape length for the
currently selected CD appears, followed
by the total playing time for sides A and
B respectively.
19