Sony CDP-CX210 - Manual (Page 5)

Getting Started
Hookups
When connecting the audio cord, be sure to match the
color-coded cord to the appropriate jacks on the
components: Red (right) to Red and White (left) to
White. Be sure to make connections firmly to avoid
hum and noise.
CD player Amplifier
i LINE OUT i INPUT )
L @—
—
CD
—
—0)R
• If you have a Sony receiver (amplifier) equipped with
the CONTROLAI jack
Be sure to connect the player to the CD IN jacks on the
receiver (amplifier). When making this connection, set the
COMMAND MODE of the player to CDl (see the
illustration below). If you further connect the player and
the receiver (amplifier) via the CONTROL A1 jacks with the
monaural (2P) mini-plug cord (not supplied), you can use
the Auto Function feature between these components. For
details, refer to the supplementary "S-Link^’^/CONTROL­
AI Control System" instructions and the instructions
supplied with the receiver (amplifier).
When to use the COMMAND MODE selector
The COMMAND MODE selector is set to CDl at the
factory for normal use. You can control this player by
connecting to a Sony CD Player with the player control
function, via the CONTROL A1 jacks. When making this
connection, set the COMMAND MODE selectors of each
player to the appropriate position according to the
connected line input jacks. For details, refer to the
instructions supplied with the connected player.
When using another Sony CD player together with
this player
You can make the supplied remote effective only for this
player.
♦ When using the player equipped with the
COMMAND MODE selector:
Set the COMMAND MODE selector of this player to
CDl and that of another player to CD2 or CD3. Then
set the CDl /2/3 switch on the remote supplied for
each player accordingly.
♦ When using the player not equipped with the
COMMAND MODE selector;
The command mode of the player without the
COMMAND MODE selector is set to CDl. Set the
COMMAND MODE selector of this player to CD2, and
set the CDl/2/3 switch on the remote to CD2.
Connecting the AC power cord
Connect the AC power cord to a wall outlet.
Note on placement
Be sure to place the player on a horizontal place.
If the player is slanted, it may cause malfunction or
damage the player.
O
n
o O
X