Cable or antenna connections – Sony KV-32S42 User Manual
Page 9
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Connecting directly tO cable or an
antenna
The connection you choose will depend on the
cable found in your home. Newer homes will
be equipped with standard coaxial cable (see
A); older homes will probably have 300-ohm
twin lead cable (see B); still other homes may
contain both (see C).
Cable or Antenna Connections
VHF only
VHF/UHF
75-ohm
coaxial cable
ñu
VHF only
or
UHF only
300-ohm twin
lead cable
(Rear of TV)
VHF/UHF
Antenna connector
KV-32566, 35S66 only
If your cable provider does not feature local
channels, you may find this set up convenient
(Rear of TV)
CATV cable
AUX
Cable and antenna
(No connection “TO
^
CONVERTER" in this case)
^
. . TO CONVERTER
Antenna cable
VHF/UHF
Select CABLE or antenna (ANT) mode by
pressing
ANT
on the remote control.
75-ohm coaxial cable
(Rear of TV)
VHF/UHF
EAC-66 U/V mixer
:zU
(not supplied)
Note
In order to receive channels with an antenna,
you will need to turn your CABLE to OFF and
perform the AUTO PROGRAM function, (see
page 23).
300-ohm twin lead cable