Location and function of parts and controis, Nj ac in connector, 0 line a – Sony GVM-1310 User Manual
Page 6: Line b, Y/c 75 n termination switch, E oil (i [i bs oil
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Location and Function of Parts and Controis
O
C)
® o @
Y/C 750
OFF [g ON
IN
au
DIO oyj
e/64 COLOR a DIGITAL
HO □□
8 COLOR CL ANALOG
[E oil (i [i BS oil
[nj AC IN connector
Connect the supplied power cord.
0 LINE A
To monitor the input signal fed through this line input,
press the LINE A input select button on the front panel.
VIDEO IN connector(BNC type)
AUDIO IN jack(monaural)(phono type)
Connect to the video and audio outputs of video
equipment such as VCRs or video disc players.
For a loop-through connection, connect to the video and
audio outputs of another monitor.
VIDEO OUT connector(BNC type)
AUDIO OUT jack(monaural)(phono type)
For a loop-through connection, connect to the video and
audio inputs of another monitor.
When a connecting cord is connected to the VIDEO
OUT connector, the 75-ohm termination of the input is
automatically released and the signal input to the
VIDEO IN connector is output from this connector.
LINE B
To monitor the input signal fed through this line input,
press the LINE B input select button.
Y/C 75 n termination switch
When only the Y/C IN connector is connected (i.e.
nothing is connected to the Y/C OUT connector), set this
switch to ON.
When both Y/C IN and OUT connectors are connected
together for a loop-through connection, set this switch to
OFF.
Y/C IN connector(4-pin mini-DIN)
Connect to the Y/C output of video equipment.
AUDIO IN jack(monaural)(phono type)
Y/C OUT connector(4-pin mini-DIN)
For a loop-through connection, connect to the Y/C input
of another monitor.
AUDIO OUT jack(monaural)(phono type)