Sony KV-19TS20 - Manual (Page 19)

Timer/Block
Available Functions
Internal clock Once the internal clock is set, the current time will appear on the screen.
It is necessary to set the clock correctly to activate the program start TIMER and channel
BLOCK.
Program start TIMER Makes a program of your choice appear on the screen automatically at the desired time.
Channel BLOCK Blocks a channel from appearing on the screen for 12 hours.
Use channel BLOCK to prevent children from watching undesirable programs.
The buttons used for the above functions
are located on the Remote Commander.
To set the internal clock, program start TIMER and channel BLOCK, you
must summon the corresponding “pages": “clock page," “TIMER page"
and "BLOCK page.”
To change the “pages”, press TIMER/BLOCK.
IT/BI stands tor the TIMER/BLOCK button.
T/B
^ “normal page” ^ ^ “BLOCK page” ^
Undications in redW
• All settings will be erased from the unit's memory if the unit is unplugged, or if a
power failure occurs.
• The TIMER and BLOCK will operate only if the clock is set correctly.
• If the TIMER and BLOCK are set for overlapping times on the same channel, the
blocked channel will appear on the screen at the time set on the TIMER.
19