Sony HCD-541 - Manual (Page 13)

Receiving Broadcasts
This section describes about the various convenient ways of tuning.
Before reception, be sure to connect the supplied AM and FM antenna.
SYSTEM POWER
-»ON
1 2 3
-S3
no
nn
3s O
BTT t TTTTT
1--- 1 r.... 1
o B lj _ il JQ o
EfitHSü
Sgg □§
I
□□
Press TUNER.
VIDEO 1/MO VIDEOS TAPE CO TUNER PHONO
"TUNER* appears on the display.
The CD section is automatically turned off in the
TUNER mode.
2
Press BAND to select FM or AM.
band !
FM
Press DUAL MODE TUNING - or +.
For a lower F==
frequency | —
For a higher
frequency
b
* Tuning in automatically
Keep pres^g DUAL MODE TUNING - or h - for
about 1 second.
When a station is received, the automatic tuning
stops.
To stop automatic tuning
Press DUAL MODE TUNING - or +.
* Tuning in manually
Press DUAL MODE TUNING - or + to select the
station.
Indicators in the display
* "TUNED” appears when a station is tuned in.
• "STEREO* appears when an FM stereo program of
sufficient signal strength is received.
To change die AM tuning interval
The AM tuning interval is preset at the factory to 10 kHz to
match the ffequetKy allocation system of your country. To
change the interval to 9 kHz, proceed as follows.
1 Press SYSTEM POWER to turn on the unit.
2 Press TUNER.
3 Set the BAND selector to AM.
4 Press SYSTEM POWER to turn the imit off.
5 While pressing DUAL MODE TUNING •«•, press SYSTEM
POWER to turn the unit on.
To reset the interval, follow the same procedure.
Note
When the interval is changed, all stored stations, the settings
of SUPER WOOFER ON/OFF, SURROUND ON/OFF and
BASS/TREBLE will be erased from the memory. After
changing the interval, be sure to perform these settings
again.
13