Getting ready for dolby surround sound, I power-»oni 14 2 6, 1 press sound neloonfoff to on – Sony STR-D790 User Manual
Page 28: 2 press dolby sur, Press t. tone on the remote commander to set toon, Sequence of the test tone
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Getting Ready for Dolby Surround Sound
Adjusting the Speaker Volume
'o enjoy the surround sound to the maximum on playing any
>rogram sources, adjust the front, rear, and center (if
;onnected) speakers to the same volume level. The
idjustment must be done with a test tone in the DOLBY
>URROUND mode, but the level once adjusted can be used
3r all surround modes.
'ou can adjust the volume level from your listening position
>y using the remote commander.
i POWER-»
on
I
14 2 6
• ° . l
I—
t-
d) o t W I T IÌÉM-I
o (D
6
Press CURSOR MODE.
The SURR (surround) indicator lights up.
To adjust the level of rear speakers
Press A or V to select the rear level nrode and then
adjust the level with < or > or REAR LEVEL +/- on
the remote commander.
To adjust the level of center speakers
Press A or V to select the center level mode and
then adjust the level with < or > or CENTER LEVEL
+/- on the remote commander so that sound from
each speaker is heard in the same volume level at
the listening position. (When adjusting the VOLUME
control on the receiver, all speakers are adjusted
simultaneously.)
ooioe
O ' OBOO
O
30
aO
i-5,7
1
Press SOUND nELOONfOFF to ON.
The last selected sound field is displayed in box.
2
Press DOLBY SUR.
DOLBY SUR appears on the display.
Select a program source with the function
selector and start playback.
4
Select the Dolby pro logic mode with the DOLBY
PRO LOGIC MODE button according to your
speaker system.
Press T. TONE on the remote commander to set
toon.
Sequence of the test tone
In a system with a center speaker;
The test tone will be output automatically from the front L,
center, front R, and the rear speakers in succession.
Front left
V Center !
ksJ ^ H ^ fez
Front right
|3CH. LOGIC;
NORMAL and WIDE modes
0
Rear left and right
©
In a system without a center speaker:
The test tone will be output automatically from the front left
and right speakers and the rear speakers alternately.
The receiver is preset in the factory to get an optimum
surround level as long as each speaker has an equal
efficiency.
8