Sony KV-32TS35 - Manual (Page 44)

I
Chiner 4: OOter Connections
Connecting Video Equipment
After connecting, you will be able to ... — Play back video tapes
— Record TV programs
— Record one TV program while viewing another
— Watch 2 TV programs at once using a window picture
(Picture-in-Picture, p. 26)
Connecting a VCR with an S video output jack (except KV>27TS27)
Rear of TV
SVIOEO»
MnOOÜT
lnWMM>
to VHF/UHF
: Signal flow
to S VIDEO
YC-15V/30V (not supplied)
to VIDEO
AUDIO-L (white) VHF/
UHF
output
to VIDEO
AUDIO-R (red)
RK-74A (not supplied)
to audio output
Ito s
video
' output
VCR
• If you connect a monaural VCR, connect the audio
output of the VCR to the L (MONO) jack of VIDEO IN
on the TV,
The monaural sound will be heard from both speakers.
• For operating instructions, refer to the instruction
manual furnished with the VCR.
• If the picture or sound is affected, move the VCR away
from the TV,
About S video input
Video input and output signals can be separated into Y
(luminance or brightness) and C (chroma or color)
signals. Usually these two signals are combined in a VCR
and sent as one signal to a TV. Separation of the Y and
C signals prevents them from interfering with one
another, thereby improving picture (especially color)
quality.
This TV is equipped with an S video input jack through
which these separated signals can be Input directly. This
way you can connect your S video-equipped VCR
separately from a non-S video VCR.
44 Chapter 4: Other Connections