Adding tracks to the end of a program, Q' to create another program, Note – Sony TC-WE825S User Manual
Page 10
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
u
Adding tracks to the end of a program
Press ■ (CLEAR) once, and follow Steps 2 to 5 in
"Creating Your Own Program (RMS Play)" on page 9.
'Q'
To create another program
Press ■ (CLEAR) until the order on the program
returns to 0 and the cursor flashes above track number 1
in the display, then follow Steps 2 to 5 on page 9.
You can use your Sony remote to perform RMS
programming
If your Sony stereo receiver's remote has RMS buttons,
do the following steps,
1
Turn on the receiver and press TAPE.
2
Press RMS/START.
3
Press O or <l to select the front or reverse side of
the tape, and the number keys and the >10 key to
specify the tracks.
4
Press RMS/START again to start RMS Play.
Note
For more information on the availability of Sony stereo
receiver remotes with RMS capability, contact your
nearest Sony dealer.
10