Replacing the fuse of the car battery cord, Notes on the car connecting pack, Plug end – Sony D-EJ616CK User Manual

Page 16: Fuse, Cigarette lighter plug

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Replacing the fuse of

the car battery cord

If the player does not operate, check the fuse.
If it is blown, replace it as follows:

Turn off the player and remove the
cigarette lighter plug from the
cigarette lighter socket.

2 Remove the plug end by turning it

counterclockwise.

3 Remove the defective fuse from

the plug.

4 Insert a new fuse into the plug.

3 Replace the plug end by turning it

clockwise.

Notes on the car connecting pack

• If no sound is heard or the car connecting pack is

ejected, change the direction of playback on the

car cassette deck.

• Never insert the cord end of the car connecting

pack into the cassette insertion door. Otherwise,

the cord may break or the car cassette deck may

be damaged.

• You cannot use the car connecting pack with

some car cassette deck.

• The cord should be placed so that it does not

hinder driving.

• To disconnect the cord from the player, pull it out

by grasping the plug. Never pull the plug out by

the cord.

• With some car cassette decks, you may hear some

rattling noise from the car connecting pack.

However, this is not a sign of malfunction.

Plug end

Fuse

Cigarette lighter plug

Notes

Be sure to use a fuse of the same amperage and

length as the one to be replaced. Never use a

piece of wire as a substitute for the fuse.

If the fuse is blown again after replacing it,

contact your nearest Sony dealer. In such a case,

bring the defective fuse to the dealer with you.

16

Advertising
This manual is related to the following products: