Installation, Step 1: connect the computer, Note on handling the video signal cable – Sony CPD-100VS User Manual
Page 10: Step 2: connect the power cord, Ii step 3: turn on the monitor and computer, Step 4: if necessary
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Installation
■ step 1: Connect the computer
With the computer switched off, connect the video signal cable to the
display (VGA) connector on your computer. If your computer supports
the DDC plug-and-play standard, this connection will enable the DDC
communication between the monitor and the computer.
Also the video signal cable is combined with audio and microphone
cables. If your computer is equipped with sound capability, connect the
audio and microphone plugs to appropriate jacks located on your
computer.
For Sony VAIO scries computer users:
The color coding on each connector housing will ease your work for
proper connection.
Computer
Red
to microphone connector
Note on handling the video signal cable
Do not touch the pins of the video signal cable.
■ Step 2: Connect the power cord
With the monitor switched off, ccannect the power cord to the monitor
and the other end to a power outlet.
II
Step 3: Turn on the monitor and computer.
■ Step 4: If necessary...
Adjust the user controls according to your personal preference.
The installation of your monitor is complete. Enjoy your monitor.
Getting Started