Sony DSC-F1 - Manual (Page 10)

The indicators during
recording
Every time you press DISPLAY during
recording, the indications on the LCD
screen change as follows: "Simplified
indicatiox\s" —» "Detailed indications"
—» "No indication. " Tlie indicators on
the screen are not recorded.
Simplified indications
Remaining
battery
indicator
(page 7) IMAGE QUALITY
indicators (page 29)
FINE; Fine mode
STD: Standard mode
SNAP: Snapshot mode
Remaining MEM
(memory) indicator
Detailed indications
ST[
MEM 12/60-
-40
111:25 AM
10
No. of stored images/No. of
images that can be stored
in the camera*
('total oi stored images and
images that can be stored)
Oate/time indicators displayed when
DISPLAY is pressed (page 33)
Automatic recording and
manual recording
Recording mode is different
depending on the setting of the
function dial.
n "CAMERA |A]'' (Automatic
recording)
The AE (Auto Exposure) function
and AWB (Automatic White
Balance) function adjust exposure,
shutter speed, brightness of the
flash, etc. automatically. Image
quality is set to "STANDARD."
n "CAMERA [^" (Manual recording)
You can select exposure, shutter
speed, recording mode, image
quality, etc., manually in the
CAMERA MENU.
Using the flash
Press FLASH. The CHARGE lamp
flashes and the image disappears from
the LCD screen. After about 12
seconds, the image appears again and
the flash indicator ( i ) is displayed.
Then you can shoot images using the
flash.
.Nl/.
FLÀ'SIf'
^CHARGE
"K
If you press FLASH while the flash
indicator is displayed, flash mode is
released, and the flash indicator
disappears. If you do not press the
shutter button within about 3 minutes
after the flash indicator appears on the
LCD screen, flash mrxie is also
released.
If the exposure warning indicator ( iii )
appears on the LCD screen, we
recommend you to use the flash.