Chicago Electric Powertools 7" PORTABLE WET CUTTING 40315 User Manual
Page 5
Page 5
SKU 40315
For technical questions, please call 1-800-444-3353.
4. Use tools with the lowest vibration
when there is a choice between dif-
ferent processes.
5. Include vibration-free periods each
day of work.
6. Grip tool as lightly as possible (while
still keeping safe control of it). Let
the tool do the work.
7. To reduce vibration, maintain the tool
as explained in this manual. If any
abnormal vibration occurs, stop use
immediately.
SPECIFIC SAFETY WARNINGS
1. Maintain labels and nameplates on
the Tile Saw. These carry important
information. If unreadable or miss-
ing, contact Harbor Freight Tools for a
replacement.
2. Use the right product for the right
job. There are certain applications
for which this product was designed.
Do not use small equipment, tools, or
attachments to do the work of larger
industrial equipment, tools, or attach-
ments. Do not use this product for a
purpose for which it was not intended.
3. Be sure the product is properly in-
stalled with the water hose hooked
up to the Blade Guard (49) to keep
the blade wet while in use.
4. This product must continuously
run with cold water. Dry running will
cause serious damage.
5. WARNING! Keeps hands and
fingers away from cutting area and
Saw Blade.
6. Check Blade Guard for proper for-
ward/backward movement before
each use. Do not operate the Tile
Saw if the Blade Guard does not
move freely. Make sure the Blade
Guard moves freely and does not
touch the Saw Blade or any other
part of the Saw, in all angles and
depths of cut.
7. Do not handle the Power Switch
(21) with wet hands.
8. Make sure the Tile Saw is located
on a flat, level, sturdy surface ca-
pable of supporting the weight of
the Saw and work pieces.
9. Always use 67393 7” Continu-
ous Rim Diamond Saw Blade (not
included, sold separately) with a 1”
round arbor hole, and rated at 3565
RPM or greater.
10. Use the Tile Saw only for cutting
dry or wet ceramic tile, quarry
tile, marble, terra-cotta, and slate
with 1” arbor hole and a maximum
thickness 1”.
11. Do not use the Tile Saw for cutting
metals or for cutting curves. This
may cause the Saw Blade to break
and/or reduce its service life.
12. Make sure the Saw Blade is wet at
all times when cutting.
13.
To reduce the risk of electrocution,
keep all connections dry and off
the ground. Do not touch plug with
wet hands. Ground Fault Circuit In-
terrupter (GFCI) protection should be
provided on the circuit(s) or outlet(s)
to be used for the tile saw (GFCI is
not included in this machinery). Re-
ceptacles are available having built-in
GFCI protection and may be used for
this measure of safety.
REV 10e