Attaching the label to the rotary commander, Turning on the clock, Display — power select function – Sony CDX-4180 User Manual
Page 13: Power select function, Turning on the clock display
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Attaching the label to the
rotary commander
You can control this unit with the optional
rotary commander (RM-X4S).
Several labels are supplied with the rotary
conunander. Attach the label that matches the
fuiKtions of this unit and the mounting
position of the rotary commander.
After you mount the rotary commander, attach
the label in the illustration below.
Turning on the clock
display
— Power Select Function
Only for cars with an accessory position on the
ignition key switch
To turn the Power Select Function ON
Press (OFF) while pressing (
sound
).
The Power Select Function ties the clock
display power to the accessory position on
the ignition key switch.
To avoid battery wear, the clock is not
displayed while the unit is initializing.
Note
You cannot operate this function with the
optionai rotary remote (RM-X4S).
>
o.
a.
r+
o’
3
SL
3
0
1
%
Ф
3
13