Sony PCG-TR3AP2 User Manual
Page 36
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
VAIO® Computer Quick Start
What do I do if the message, “Press <F1> to resume, <F2> to
setup” appears at the bottom of the screen?
1
Press the F2 key to launch the BIOS Setup window.
2
Set the date (month/day/year). Press Enter.
3
Use the Down Arrow key ^ to select System Time, set the time (hour:
minute: second), and press Enter.
4
Use the Right Arrow key to select the Exit tab, and press the Down
Arrow key 4' to select Get Default Values. The message Load default
values for all SETUP items appears.
5
Press Enter. When the Setup Confirmation window appears, select Yes,
and press Enter.
6
Select Exit (Save Changes), and press Enter. When the Setup
Confirmation window appears again, select Yes, and press Enter. The
computer restarts.
If you receive this message on a regular basis, contact Sony Online Support
(
What do I do if the Windows operating system does not start?
□
For models with a floppy disk drive, make sure the computer does not have a
non-bootable floppy disk in the drive. If a non-bootable flop'py disk is in the
drive, remove the floppy disk and restart the computer.
□
You may need to initialize the BIOS.
1
Turn off the computer.
2
Remove any peripheral devices connected to the computer, and restart
the computer.
3
Press the E2 key when the Sony logo appears to launch the BIOS Setup
window.
4
Use the Right Arrow key to select the Exit menu, and then use the
Down Arrow key 4^ to select Get Default Values. The message Load
default values for all SETUP items appears.
5
Press Enter. When the Setup Confirmation window appears, select
Yes, and press Enter.