Height adjustment – LG LSC 21943ST User Manual

Page 11

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

If the freezer

compartment door

is lower than the

refrigerator

compartment door

If the freezer

compartment door

is higher than the

refrigerator

compartment door

- first method

If the freezer

compartment door

is higher than the

refrigerator

compartment door

- second method

(Applicable to

some mdels only)

^ CAUTION

After leveling the

door height

Height adjustment

Make them level by inserting a flat (- type) driver into the groove of the left height

adjusting screw and rotating it clockwise ®.

Height difference

Make them level by inserting a flat (- type) driver into the groove of the right height

adjusting screw and rotating it clockwise ®.

Adjust the level when the refrigerator door is lower than the freezer door during the

1. Using the wide side of the tool for adjustment turn the keeper nut 2)

{

)

clockwise to loosen the Keeper nut.

2. Using the narrow side of the tool for adjustment, turn the adjustment hinge pin

2) ( •»..) clockwise or { ........

/

)

counterclockwise to level the refrigerator and

freezer door,

3. After setting the level of the door, turn the keeper nutj..........) counterclockwise to

tighten.

Do not force too hard to level the height. The hinge pin can be pulled out,
(Adjustable range of height is a maximum of 2" (5 cm))

The refrigerator door will close smoothly by raising the front side by adjusting the

height adjusting screw. If the door does not close properly because it is improperly

adjusted, the performance of the refrigerator will be affected.

9

Advertising