Stacking kit installation instructions, A warning, Washer – LG TD-V12246E User Manual
Page 15: Accessories installation, Iriizlat
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
ACCESSORIES INSTALLATION
stacking Kit Installation Instructions
To ensure safe and secure installation, please
observe the instructions below.
A WARNING!
• The
weight
of
the
dryer and the
height of
installation makes
the
stacking procedure
too risky
for one person.
This
procedure
should be performed by 2 or more
experienced service
personnel.
• Incorrect installation can cause serious
accidents.
?
JL
r]
stacking kit
1
2
Place washer firmly on a stable, even and
solid floor.
Peel protective paper off the tape from the
stacking kit side bracket.
3
Fit the stacking kit side bracket firmly to the
side of top plate by attaching the double
sided tape to top plate as picture shows.
R
Clean ttie surface before attaching the brackets
and double-sided tape.
Secure stacking kit side bracket to the
washer with a screw on the back of bracket.
Repeat Steps 2, 3,4 for the other side.
Place the
dryer
on top of the washer by fitting
legs as shown In the picture.
Avoid
finger
injuries - be careful not to pinch fingers
between
the
washer
and dryer. Slide dryer
slowly backwards to the stopper of kit.
A
WARNING!
• Do not
Stack
a washer on the top of the dryer.
• Incorrect installation can cause serious
accidents.
-Washer
iriiZLat
Insert the front rail. Push the front rail back
to the stoppers of side stacking kit.
7
Do not
unstabi