Connection 1, Connection 2, External equipment connections continued – LG 23LX2R User Manual
Page 12
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Installatíon
External Equipment Connections Continued
VCR Setup
- In Video mode, TV aytomatically reverts to TV mode if the
FCR
button or
FLASHBK
buttons are pressed.
Connection 1
Set VCR switch to 3 or 4 and then tune TV to the same
channel number.
Connection 2
1. Connect the audio/victeo output jacks on VCR to the corre
sponding input jacks on the TV. When connecting the TV
to a VCR, match the Jack colors (Video = yellow, Audio
Left = white, and Audio Right = red).
2. Insert a video tape Into the VCR and press PLAY on the
VCR. (Refer to the VCR owner’s manual.)
3. Use the
TVAfIDEO
button on the remote control to select
Video.
(If connected to S-VIDEO on side panel, select the
S-Video
external Input source.)
i,-.; f.-.
'■.}
i.'.
Sit- I'.-
Cable TV Setup ^
- After subscribing to a local cable TV service and installing a converter, you can watch cable TV programming.
- For further cable TV information, contact a local cable service provider.
Connection 1
1. Select 3 or 4 with channel switch on cable box.
2. Tune the TV channel to the same selected output channel
of cable box.
3. Select channels at the cable box or with the cable box
remote control.
Connection 2
1. Connect the audio/video output jacks on Cable Box to the
corresponding input Jacks on the TV. When connecting
the TV to Cable Box, match the jack colors
(Video
=
yellow. Audio Lett
= white,
and Audio
Right =
red).
2.
Use the
TV/VIDEO
button on the remote control to select
Video.
^
3.
Select channels with the cable box remote control.
Cable Box
12