Cannondale 120858 - Manual (Page 9)

10858.PDF
9
bottom bracket shell
KB6180/
QC616/
KT011/
KT013/
15mm
8mm
KT012/
3/8” drive
KT010/
Figure 5.
Crankset Compatability
The BB shell is compatable with the BB30 Standard. See http://www.bb30standard.com/ For
information See SI Cranksets Owner’s Manual Supplement. See http://www.cannondale.com/
tech/.
Bearing Maintenance
Shell bearings (KB6180/) are sealed cartridge type and do not require lubrication. Inspect
bearing condition annually (at a minimum) and anytime the crankset assembly is disassembled
or serviced. The bearings are a press fit within the shell. Old bearings should not be reinstalled
if removed. Replace both bearings at the same time.
Replacements circlips (QC616/) are available if the circlips become damaged. The circlips can be
lifted from the BB groove (inset) by lifting the hooked end with a thin blade screwdriver.
CAUTION
DO NOT FACE, MILL OR MACHINE THE BOTTOM BRACKET SHELL FOR ANY REASON.
Doing so can result in serious damage and possibly a ruined bike frame.