Tools required for assembly, Remove pressure washer from carton, Preparing the pressure washer for first use – Craftsman 919.678250 User Manual
Page 11
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Tools Required for Assembly
Adjustable wrench
Pliers
1 /2” Socket wrench
Funnel
Remove Pressure Washer from Carton
• Open box from the top. Locate and remove from
box, the parts box, which includes gun, handle,
wand,oil, knobs and J bolts. Next remove the parts
bag and the handle.
• Cut carton along dotted lines.
• Remove all carton inserts.
• Roll unit through opening in carton.
NOTE: The high pressure and chemical hose are
located at the bottom of the box.
Preparing the Pressure Washer for First Use
• Note: Included with your pressure washer is a video
tape on how to prepare your unit for operation. It is
recommended you view this tape before performing
the next steps.
1. • Insert handle onto frame.
• Slide J bolts into frame.
• Tighten knobs turning in clockwise direction.
/0^^2237//trighton knob in clockwise
' direction to threaded end of J boit.)
Ilneert J boit here. Threaded end
goes in bottom hole)